1500-1800 pc per hour (average about 2sec per pc) 1,500-1800 ไม้ต่อชั่วโมง (เฉลี่ยประมาณ 2-3 วินาทีต่อไม้) Mold plate is not included. ราคาข้างต้น ยังไม่รวมแผ่นแม่พิมพ์
Wood skewer machine salecnc.net It is popular in food industry factories, used for skewered food such as BBQ meat, grilled pork, grilled chicken, grilled beef, BBQ vegetables, satay, meatballs, processed fish products, or foreign menus such as Japanese yakitori chicken.
Each day, a lot of manpower is required to skewer the sticks. The skewer must be skilled and must exceed the target for that day, which risks accidents during work and your goals not being achieved as expected.
It helps reduce accidents or injuries to employees, saves production costs, invests less but produces more, maintains product quality because the operator has the least chance of touching food, thus reducing the chance of food contamination. And importantly, it is easy to install and use.
Selling grilled pork skewers for 3 baht each, earning almost 200,000 baht per month, a way to survive during the Covid era | SME shows the way to get rich
✔ Traditional grilled pork recipe by... Moo Ping Muang Ong
✔ Pork satay, the ingredients can also be skewered
Skewer the pork satay on small, thin sticks using the automatic skewer machine (Stick Machine).
✔ Pork loin, pork belly, sliced into large pieces
Slice pork loin into large pieces and place them on the mold block. Use a skewer machine to make sure every skewer sticks together.
The large pieces of pork belly fit perfectly into the mold block. Use a skewer machine and every skewer sticks together 👍
✔ Design a mold for making grilled pork, pork and fish sauce recipe
The technical team designed and produced the mold for Pla Ra Pork using the Router XJ-1325.
User Manual : Automatic Wood Plugging Machine
1. Plug the three air pumps into the automatic plug-in machine (8 mm air hose).
2. Arrange the meat on the mold.
3. Put the wood into the automatic wood skewer machine (wood length 150mm, size 2.5-3mm).
Be careful! You must place the sticks in the same direction.
4. Place the mold on the conveyor belt.
Be careful! You must place the skewer on the correct side. If you place it incorrectly, the conveyor belt will still work, but the skewer will not fall on the meat.
5. Turn on the plug-in machine.
Manual : Automatic Stick Machine
1. Plug the air pump into the Automatic stick machine (lime diameter 8 mm)
2. Arrange the meat on the mold.
3. Put the skewers into the Auto stick machine (Skewers long 150 mm diameter 2.5-3 mm)
Be careful! The skewers must be inserted in the same way.
4. Place the mold on the belt.
Be careful! The mold must be put on the right side. The machine won't skewers into the meat.
5. Open the Auto stick machine.
Troubleshooting if the machine malfunctions
1. While the power is on, the stick does not move up to the insertion point.
Troubleshooting: Fill the slots with wood to make it easier and faster to prepare the wood for insertion.
2. The belt does not run/works.
Troubleshooting: Open the motor cover and check the belt to see if the belt is working.
3. The wood does not fit into place after the mold has moved to position.
Troubleshooting: Check the Limit Switch (sensor) on the top of the stick. Use an object to touch the sensor.
If the light is on, it means that it can work normally. Check for dust that has accumulated.
If there is no light, check the sensor wires for breaks or damage.
4. The stick is not inserted correctly into the mold slot (the stick breaks).
Troubleshooting: Adjust the Limit Switch (sensor) to match the magnet.
5. When the device is turned on, there is no response signal. The device does not work.
การแก้ปัญหา : ตรวจสอบปลั๊กไฟ ดูคอลโทรลเลอร์ภายในเครื่อง หากมีปัญหา ติดต่อทางร้านทันที
Troubleshooting if the device crashes
1. while the power is on The stick does not move up that is prepared to skewer.
Solution : Fill the wood to fill the wooden slot to make the wood easier and faster to prepare the skewer.
2. Belt not running/not working
Solution : Open the cover to see the motor on the belt. Check to see if the belt is working.
3. Sticks do not plug after the mold has moved to its position.
Solution : Check the Limit Switch (sensor) on the top of the wood. Use an object to touch the sensor. There is a light on, indicating that it can work normally. Check for dust that sticks out. No lights, check the sensor wires for breaks or damage.
4. The wooden skewers do not fit into the mold cavity.
Solution : Adjust the Limit Switch (Sensor) to match the magnet.
5. Power on no response machine not working.
Solution : Check the power plug. Look at the controller inside the machine. If there is a problem, contact the shop immediately.
Stock
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
We can skewer meat according to customer requirements. Customers can specify Spec:
Add Line: @123wotsb Fern (sales engineer) 
Add Line: @sales Chompoo (sales engineer)
Reviews
There are no reviews yet.